隧道洞外亮度監測儀是保障隧道行車安全的關鍵設備，它基于光電轉換技術，利用硅光電二極管等高精度傳感器，實時捕捉隧道洞口外部自然光亮度變化，測量范圍達0～7500cd/m2，精度0.1cd/m2，響應時間低于毫秒級。設備具備IP68防護等級，能適應-50℃至+70℃環境，支持RS485等數字接口，可實現遠程監控與數據存儲，動態調節照明以消除“黑洞效應"和“白洞效應"。

隧道洞外亮度監測儀能滿足整個隧道照明控制的要求，預置控制模式的控制器根據光源測量值按預設參數自動進行切換照明開關，為隧道照明提供了優良值。它的設計符合CIE關于隧道照明測量的要求，并能滿足《公路隧道通風照明設計規范》，而且它的整體設計能滿足野外惡劣的工作環境地要求。

安裝方式：

隧道光強度監測儀安裝在隧道內指定區域的墻壁上，為了避免因事故或汽車殘骸對其的損傷，需安裝在4m左右的高度，距隧道入口大于10m的適當位置。隧道光亮度監測儀安裝在隧道外高度距路面4m左右，距隧道入口120—200m左右的適當位置。具有高可靠性和低維護量.最新微處理器技術，數字化運行，安裝調試簡易。

The tunnel portal brightness monitor is a key device to ensure traffic safety in tunnels. It is based on photoelectric conversion technology and uses high-precision sensors as silicon photodiodes to capture real-time changes in the brightness of natural light outside the tunnel portal. The measuring range reaches 0 to 7500 cdm2, with an accuracy of 0.1 cd/m2 and a response time below the millisecond level. The equipment has an IP68 protection grade, can to extreme environments from -50℃ to  70℃, supports digital interfaces such as RS485, and can achieve remote monitoring and data storage. It dynamically adjust lighting to eliminate the "black hole effect" and "white hole effect".